EPDM - Roof cladding

Water-damming layer for flat and slightly pitched roofs

Extremely flexible roof cladding, insensitive to UV radiation and ozone, for flat and slightly pitched roofs.

Pandser EPDM roof cladding is a 1.14 mm thick foil made of synthetic rubber. This material is extremely flexible and insensitive to UV radiation and ozone. EPDM roof cladding is suitable for flat and slightly pitched roofs. This could either be a green roof, a weighted system or a fully adhesively bond system.

EPDM sheets larger than the maximum widths we are able to produce by default, are called roof membranes. The vulcanized joints between the strips of foil eliminate the need for professionals to make a joint connection and make it possible to seal a roof in one go.

Characteristics of Pandser EPDM roof cladding

High elasticity, perfectly compensating for deformation
Without plasticisers, so permanently flexible
Can be glued and is resistant to spreading sparks

Processing

Suitable for renovations and new constructions
Can be glued and is therefore applicable for every professional
Fast processing and light-load operation for professionals

Kies een toepassing

Roof

Floor

Facade

Gutter

Range

Thicknesses

1.20 mm

Widths

Ranging from 2.8 m to 7 m

Delivery project-based per roll or m²

Per roll, in m² or one piece

Available dimensions and thicknesses

PANDSER EPDM roof cladding	1.20 mm
3 m x 4.2 m
3 m x 5.6 m
3 m x 7 m
4.5 m x 7 m
2.8 m x 30 m
2.8 m per m²
3.5 m x 30 m
3.5 m per m²
4.2 m x 30 m
4.2 m per m²
5.6 m x 30 m
5.6 m per m²
7 m x 30 m
7 m per m²

View all dimensions and thicknesses

Back to the overview